UniLite IL-SIG1 Signal Rechargeable LED Inspection Light 600 Lumens

The Unilite IL-SIG1 has a white inspection light, a white torch light and red, amber and green signal lights. The 10 Samsung LEDs on the main body of the torch offer two brightness settings and emit widespread light thanks to the wide reflector, making it perfect for up close inspection work. A single LED in the head of the torch to provide a concentrated beam with an output of 200 lumens. There are also additional colour signal LEDs on the body of the torch either side of the white LEDs. The top section has 6 red LEDs, the middle section has 6 amber LEDs and the bottom section has 6 green LEDs. The coloured signals are useful in the work environment for guiding vehicles into loading bays, signalling crane operators, signalling trains and any other activity that may benefit from stop, get ready and go colour signals. The light is operated with the four independent buttons, with the top left button controlling the white outputs and cycling through torch light, high main, low main and off with quick presses. The red, amber and green buttons control their respective colour LEDs, cycling through constant colour on, flashing colour and off with quick presses. The white lights and coloured lights cannot be turned on simultaneously, only one colour can be on at once. If in any mode longer that 3 seconds the next press will turn the light off. Utilising a built-in rechargeable 4400 mAh lithium-ion battery, the IL-SIG1 provides a run-time of up to 4 hours, 30 minutes on the highest setting and is easily charged back up using the supplied USB charging cable. Simply pop open the rubber dust cover on the back of the torch and insert the cable, then plug the USB end straight into a computer USB port, or into a USB mains/car adaptor. A red LED will illuminate to indicate that the unit is being charged and will go green when charging is complete. The charging time is approximately 6-7 hours. Featuring multiple ways for hands free use, the IL-SIG1 has a hanging hook, a fold out stand and a strong magnet. Product Features Red, amber and green signalling LEDsUSB charging and covered charging portIntegral hanging hook and magnet for hands free useMulti positional standReflective edging for greater visibilityUltra strength aluminium and polycarbonate housing Operational Modes Main Light High: 600 lumens: 4 hours, 30 minutes run-time; 52 m beam rangeMain Light Low: 300 lumens; 8 hours run-time; 29 m beam rangeTorch Light: 200 lumens: 10 hours run-time; 21 m beam rangeRed/Amber/Green: 24 hours run-time Technical Details Operating Modes: High / Low (Main light) / Torch light / Red / Red Flash / Amber / Amber Flash / Green / Green FlashLuminous Flux: Up to 600 lumensLamp: 10 x Samsung SMD LEDs / 1 x white LED / 18 x coloured LEDsFocus: Area lightingBeam Range: Up to 52 mBatteries Required: 1 x built-in 3.7 V 4400 mAh lithium-ion rechargeable batteryRun Time: See information aboveCharge Time: 6-7 hoursBody Material: High quality polycarbonate and aluminiumMeasurements: 205 x 60 x 42 mmWeight: 334 gramsSwitch Type: Four push buttonsIn-Built Technology: High visibility technologyImpact Resistance: 1 mOperating Temperature: -5°C to 40°CEnvironmental: Water and dust resistant to IP54 standardsRegulatory Compliance: CE / RoHS Packaging and Contents Supplied in retail packaging and includes:Unilite IL-SIG1 Signal inspection light x 1USB charging cable x 1Manual x 1